Saturday, June 13, 2009
Ducati Hypermotard
THE DUCATI HYPERMOTARD CONCEPT BIKE
The Ducati Hypermotard - a radical concept bike - takes power, aggressiveness, versatility, and sport performance to a new extreme.
The Ducati Hypermotard - the most extreme mountain conquering, urban assaulting machine.
Taking advantage of the compactness and agility of a traditional supermotard, Ducati has upped the ante with potent street power thanks to a new air-cooled twin engine. The front of the bike is as slim and compact as a single cylinder, in part thanks to the engine layout, but also due to the absence of weighty cooling radiators.
The Ducati Hypermotard takes-on urban canyons and attacks mountain curves with total abandon. High performance starts with attitude. Pared down to its essentials, the Ducati Hypermotard is an extreme performance, over-the-top motorcycle. Its purpose is single minded - to thrill.
Incredibly slim, compact and exceptionally light, with riding position to dominate, it's ready to rock every road with big-bore acceleration.
Supermotard styling makes the blood boil. This bike offers what no Supermotard can: speeds exceeding 220KPH on the race track, fuel injection and 100 horsepower on only 175 kg of dry weight.
On the Road
Bring on the curves, the bumps, the unexpected.
A rigidly triangulated tubing Trellis frame and track tested chassis geometry is matched with state-of-the-art suspension. Start off with the road-holding of huge 50mm Marzocchi R.A.C. forks, gripped by a triple screw lower fork crown, then add an Ohlins remote reservoir shock that mounts to a stout single-sided swingarm. Ultra light forged and machined Marchesini racing wheels are paired with a single radial mounted Brembo four piston, four pad calliper gripping a 320mm disc up front and a 240mm disc at the rear.
Making power
1000cc's of DESMO power
The 1000 Dual Spark engine pumps out torque and horsepower that is smooth and linear, because the roads that the Ducati Hypermotard seeks are neither smooth nor linear. A Slipper type racing clutch makes aggressive downshifting and heavy braking more exciting and by damping the abrupt engagement of lower gears while entering a turn. Magnesium engine covers subtract more weight for a feathery feel and athletic manoeuvres.
The Pilot controls :
A ride on the Ducati Hypermotard is road domination.
The wide tapered section handlebars transfer control of the tarmac to the rider. A wide full length seat design lets the pilot move fore and aft, up-front entering the turns, back for maximum traction on exit.
The Ducati Hypermotard - a radical concept bike - takes power, aggressiveness, versatility, and sport performance to a new extreme.
The Ducati Hypermotard - the most extreme mountain conquering, urban assaulting machine.
Taking advantage of the compactness and agility of a traditional supermotard, Ducati has upped the ante with potent street power thanks to a new air-cooled twin engine. The front of the bike is as slim and compact as a single cylinder, in part thanks to the engine layout, but also due to the absence of weighty cooling radiators.
The Ducati Hypermotard takes-on urban canyons and attacks mountain curves with total abandon. High performance starts with attitude. Pared down to its essentials, the Ducati Hypermotard is an extreme performance, over-the-top motorcycle. Its purpose is single minded - to thrill.
Incredibly slim, compact and exceptionally light, with riding position to dominate, it's ready to rock every road with big-bore acceleration.
Supermotard styling makes the blood boil. This bike offers what no Supermotard can: speeds exceeding 220KPH on the race track, fuel injection and 100 horsepower on only 175 kg of dry weight.
On the Road
Bring on the curves, the bumps, the unexpected.
A rigidly triangulated tubing Trellis frame and track tested chassis geometry is matched with state-of-the-art suspension. Start off with the road-holding of huge 50mm Marzocchi R.A.C. forks, gripped by a triple screw lower fork crown, then add an Ohlins remote reservoir shock that mounts to a stout single-sided swingarm. Ultra light forged and machined Marchesini racing wheels are paired with a single radial mounted Brembo four piston, four pad calliper gripping a 320mm disc up front and a 240mm disc at the rear.
Making power
1000cc's of DESMO power
The 1000 Dual Spark engine pumps out torque and horsepower that is smooth and linear, because the roads that the Ducati Hypermotard seeks are neither smooth nor linear. A Slipper type racing clutch makes aggressive downshifting and heavy braking more exciting and by damping the abrupt engagement of lower gears while entering a turn. Magnesium engine covers subtract more weight for a feathery feel and athletic manoeuvres.
The Pilot controls :
A ride on the Ducati Hypermotard is road domination.
The wide tapered section handlebars transfer control of the tarmac to the rider. A wide full length seat design lets the pilot move fore and aft, up-front entering the turns, back for maximum traction on exit.
Gilera GP850 Corsa
The Gilera celebrates the one hundred history years and the title world-wide it 250
The Gilera GP 800, the scooter more powerful.
The 850 Gilera GP Corsa estremizza the concepts of GP 800 and ulteriorly moves the limit of border between scooter and motion, approaching itself ulteriorly this last one.
The prototype without compromises where every technical and aesthetic solution is voted exclusively and totally to the increment of the performances.
Developed on the base of GP 800, this free prototype from every tie: materials of obvious derivation racing from the extreme lightness, forms studied in wind tunnel for the aerodynamics, air inlet for the increment of the engine ratings.
Every detail is studied in the minimums details and also the ciclistica is evolven in order to directly adopt mutuate solutions from the world of the superbike.
The graphical minievils, but smaccatamente Italian and accompanied from the logo that it celebrates the 100 years of Gilera, characterize aesthetic of 850 GP Corsa.
An Italian, sport and quickly recognizable style, than only Gilera can wear. 850 GP Corsa, in its aggressive single-seat configuration, the imaginary one of the fans, travel over again the tracks that have rendered the Gilera brand glorious, from the dominion of class 500 in years '50, to the victories offroad on sands Africans, till the most recent world-wide triumph of Simoncelli Mark.
The Gilera GP 800, the scooter more powerful.
The 850 Gilera GP Corsa estremizza the concepts of GP 800 and ulteriorly moves the limit of border between scooter and motion, approaching itself ulteriorly this last one.
The prototype without compromises where every technical and aesthetic solution is voted exclusively and totally to the increment of the performances.
Developed on the base of GP 800, this free prototype from every tie: materials of obvious derivation racing from the extreme lightness, forms studied in wind tunnel for the aerodynamics, air inlet for the increment of the engine ratings.
Every detail is studied in the minimums details and also the ciclistica is evolven in order to directly adopt mutuate solutions from the world of the superbike.
The graphical minievils, but smaccatamente Italian and accompanied from the logo that it celebrates the 100 years of Gilera, characterize aesthetic of 850 GP Corsa.
An Italian, sport and quickly recognizable style, than only Gilera can wear. 850 GP Corsa, in its aggressive single-seat configuration, the imaginary one of the fans, travel over again the tracks that have rendered the Gilera brand glorious, from the dominion of class 500 in years '50, to the victories offroad on sands Africans, till the most recent world-wide triumph of Simoncelli Mark.
Honda CBR1000RR ABS
The CBR1000RR with Combined Anti-Lock Braking, the most advanced (and first-ever) ABS system to find its way onto an open-class superbike.
The CBR1000RR is the lightest, most compact, and best performing motorcycle in its class, making it the standard against which all other literbikes are measured. And for 2009, it's available with Honda's high-tech electronically controlled Combined ABS for the ultimate in sport bike braking performance.
The Unique Features
- Dual Stage Fuel Injection System (PGM-DSFI) features two injectors per cylinder (see Technology Section).
- Idle-Air Control Valve (IACV) and Ignition Interrupt Control for idle stability and smoother on/off throttle response.
- Low-mount exhaust system design.
- Patented slipper clutch features cam mechanism to reduce clutch-lever pull.
- MotoGP-derived Honda Electronic Steering Damper (HESD) (see Technology Section).
- 43mm Honda Multi-Action System (HMAS) inverted front fork (see Technology Section).
- Exclusive, MotoGP-derived Unit Pro-Link® Rear Suspension (see Technology Section).
- Radial-mount front brake calipers combined with radial-actuated master cylinder.
- Centrally located fuel tank increases mass centralization for a more compact frame design.
The Engine/Drivetrain
- Compact, liquid-cooled DOHC 16-valve 999cc four-stroke inline four-cylinder engine features bore and stroke dimensions of 76mm x 55.1mm.
- Removable cylinder block with Nikasil-coated cylinders.
- Sixteen-valve cylinder head features 30.5mm intake and 24mm exhaust valves with a 12.3:1 compression ratio for efficient combustion and high horsepower.
- Larger titanium intake valves create a lighter valve train and feature double-spring design for optimum performance at high rpm.
- Intake ports use latest shot-peening technology that improves power and torque characteristics.
- Cam-pulser location between the middle cylinders allows a narrower cylinder head and frame.
- Direct shim-under-bucket valve actuation system ensures high-rpm durability and allows 16,000-mile valve maintenance intervals.
- Forged-aluminum thin-domed, high-strength pistons feature molybdenum coating for reduced friction.
- Lightweight nutless connecting rods.
- Iridium-tip spark plugs improve fuel combustion and performance.
- Dual Stage Fuel Injection (DSFI) (see Technology Section).
- 46mm throttle bodies feature Denso injectors with lightweight valving for faster reaction time and 12 holes per injector to optimize mixture atomization, combustion efficiency and power.
- Auto-enriching system is integrated into Programmed Fuel Injection (PGM-FI) module, eliminating the need for a manual choke.
- Idle Air Control Valve (IACV) minimizes torque reaction and smoothes response to small throttle changes through gradual reductions of air and fuel intake when the throttle is opened and closed.
- Ignition Interrupt Control system works with IACV and FI mapping to enhance driveability.
- Smaller and lighter ECU provides two 3-D fuel-injection maps for each cylinder and two 3-D ignition maps for cylinder pairs, creating ideal fuel mixture and spark-advance settings for superb rideability.
- MotoGP-derived twin-tunnel ram-air system allows a high volume of cooler air to the 9.7-liter airbox for linear power delivery and incredible engine performance.
- Butterfly valves inside the ram-air ducts open and close depending on throttle opening and engine rpm for optimum performance.
- Compact, low-mount exhaust system design reduces rear bodywork size and incorporates exhaust valve and catalyst, contributing to significantly improved mass centralization, and reducing roll and yaw inertia.
- High-capacity radiator incorporates twin cooling fans and allows a more compact cowl for reduced drag coefficient.
- Maintenance-free automatic cam-chain tensioner.
- Starter gears located on the right side to produce narrow engine that allows for increased lean angle.
- Patented slipper-clutch design uses a center cam-assist mechanism for easier actuation. Unlike an ordinary slipper clutch where the pressure plate moves from side to side, the Honda clutch moves both the center cam assist and the pressure plate to provide additional slipper effect.
- Nine-plate clutch is compact and tough, featuring durable friction plate material.
- Durable #530 O-ring-sealed drive chain.
The Chassis/Suspension
- Lightweight four-piece Fine Die-Cast twin-spar aluminum frame utilizes latest MotoGP technology (see Technology Section).
- Aluminum subframe is lightweight and easily removed for ease of maintenance.
MotoGP-derived, next-generation Honda Electronic Steering Damper (HESD) (see Technology Section).
- 43mm inverted aluminum-slider Honda Multi-Action System (HMAS) cartridge front fork features spring preload, rebound and compression damping adjustability, and offers precise action and unparalleled rigidity (see Technology Section).
- Exclusive, MotoGP-derived Unit Pro-Link Rear Suspension (see Technology Section).
- Radial-mounted monoblock four-piston front calipers feature chromium-plated aluminum pistons and squeeze lightweight 320mm floating discs in front and a 220mm rear disc with a single-piston caliper for exceptional stopping power.
- CBR1000RR ABS features Honda's electronic Combined ABS. This all-new ECU-controlled, hydraulically actuated system provides accurate braking force distribution to both wheels. ABS is controlled by a hydroelectronic unit and stroke simulator to ensure precise operation. Benefits include consistent lever pressure without the pulsing often associated with ABS systems. Application of rear brake does not result in immediate front brake activation unless lock-up is sensed, allowing an experienced rider to use rear brake in a normal manner during spirited riding. Combined ABS components are smaller and lighter than conventional hydraulic ABS designs, and have been located nearer to the center of the machine, enhancing mass centralization and reducing unsprung weight.
- Super-light aluminum-alloy hollow-spoke wheels feature race-spec 3.5 x 17-inch front and 6.0 x 17-inch rear dimensions.
- Centrally mounted 4.7-gallon fuel tank is positioned low in the frame, increasing mass centralization and allowing a more compact design. This design positions the rider farther forward for optimum handling.
The CBR1000RR is the lightest, most compact, and best performing motorcycle in its class, making it the standard against which all other literbikes are measured. And for 2009, it's available with Honda's high-tech electronically controlled Combined ABS for the ultimate in sport bike braking performance.
The Unique Features
- Dual Stage Fuel Injection System (PGM-DSFI) features two injectors per cylinder (see Technology Section).
- Idle-Air Control Valve (IACV) and Ignition Interrupt Control for idle stability and smoother on/off throttle response.
- Low-mount exhaust system design.
- Patented slipper clutch features cam mechanism to reduce clutch-lever pull.
- MotoGP-derived Honda Electronic Steering Damper (HESD) (see Technology Section).
- 43mm Honda Multi-Action System (HMAS) inverted front fork (see Technology Section).
- Exclusive, MotoGP-derived Unit Pro-Link® Rear Suspension (see Technology Section).
- Radial-mount front brake calipers combined with radial-actuated master cylinder.
- Centrally located fuel tank increases mass centralization for a more compact frame design.
The Engine/Drivetrain
- Compact, liquid-cooled DOHC 16-valve 999cc four-stroke inline four-cylinder engine features bore and stroke dimensions of 76mm x 55.1mm.
- Removable cylinder block with Nikasil-coated cylinders.
- Sixteen-valve cylinder head features 30.5mm intake and 24mm exhaust valves with a 12.3:1 compression ratio for efficient combustion and high horsepower.
- Larger titanium intake valves create a lighter valve train and feature double-spring design for optimum performance at high rpm.
- Intake ports use latest shot-peening technology that improves power and torque characteristics.
- Cam-pulser location between the middle cylinders allows a narrower cylinder head and frame.
- Direct shim-under-bucket valve actuation system ensures high-rpm durability and allows 16,000-mile valve maintenance intervals.
- Forged-aluminum thin-domed, high-strength pistons feature molybdenum coating for reduced friction.
- Lightweight nutless connecting rods.
- Iridium-tip spark plugs improve fuel combustion and performance.
- Dual Stage Fuel Injection (DSFI) (see Technology Section).
- 46mm throttle bodies feature Denso injectors with lightweight valving for faster reaction time and 12 holes per injector to optimize mixture atomization, combustion efficiency and power.
- Auto-enriching system is integrated into Programmed Fuel Injection (PGM-FI) module, eliminating the need for a manual choke.
- Idle Air Control Valve (IACV) minimizes torque reaction and smoothes response to small throttle changes through gradual reductions of air and fuel intake when the throttle is opened and closed.
- Ignition Interrupt Control system works with IACV and FI mapping to enhance driveability.
- Smaller and lighter ECU provides two 3-D fuel-injection maps for each cylinder and two 3-D ignition maps for cylinder pairs, creating ideal fuel mixture and spark-advance settings for superb rideability.
- MotoGP-derived twin-tunnel ram-air system allows a high volume of cooler air to the 9.7-liter airbox for linear power delivery and incredible engine performance.
- Butterfly valves inside the ram-air ducts open and close depending on throttle opening and engine rpm for optimum performance.
- Compact, low-mount exhaust system design reduces rear bodywork size and incorporates exhaust valve and catalyst, contributing to significantly improved mass centralization, and reducing roll and yaw inertia.
- High-capacity radiator incorporates twin cooling fans and allows a more compact cowl for reduced drag coefficient.
- Maintenance-free automatic cam-chain tensioner.
- Starter gears located on the right side to produce narrow engine that allows for increased lean angle.
- Patented slipper-clutch design uses a center cam-assist mechanism for easier actuation. Unlike an ordinary slipper clutch where the pressure plate moves from side to side, the Honda clutch moves both the center cam assist and the pressure plate to provide additional slipper effect.
- Nine-plate clutch is compact and tough, featuring durable friction plate material.
- Durable #530 O-ring-sealed drive chain.
The Chassis/Suspension
- Lightweight four-piece Fine Die-Cast twin-spar aluminum frame utilizes latest MotoGP technology (see Technology Section).
- Aluminum subframe is lightweight and easily removed for ease of maintenance.
MotoGP-derived, next-generation Honda Electronic Steering Damper (HESD) (see Technology Section).
- 43mm inverted aluminum-slider Honda Multi-Action System (HMAS) cartridge front fork features spring preload, rebound and compression damping adjustability, and offers precise action and unparalleled rigidity (see Technology Section).
- Exclusive, MotoGP-derived Unit Pro-Link Rear Suspension (see Technology Section).
- Radial-mounted monoblock four-piston front calipers feature chromium-plated aluminum pistons and squeeze lightweight 320mm floating discs in front and a 220mm rear disc with a single-piston caliper for exceptional stopping power.
- CBR1000RR ABS features Honda's electronic Combined ABS. This all-new ECU-controlled, hydraulically actuated system provides accurate braking force distribution to both wheels. ABS is controlled by a hydroelectronic unit and stroke simulator to ensure precise operation. Benefits include consistent lever pressure without the pulsing often associated with ABS systems. Application of rear brake does not result in immediate front brake activation unless lock-up is sensed, allowing an experienced rider to use rear brake in a normal manner during spirited riding. Combined ABS components are smaller and lighter than conventional hydraulic ABS designs, and have been located nearer to the center of the machine, enhancing mass centralization and reducing unsprung weight.
- Super-light aluminum-alloy hollow-spoke wheels feature race-spec 3.5 x 17-inch front and 6.0 x 17-inch rear dimensions.
- Centrally mounted 4.7-gallon fuel tank is positioned low in the frame, increasing mass centralization and allowing a more compact design. This design positions the rider farther forward for optimum handling.
Subscribe to:
Posts (Atom)
